IPitomy IP1100+ PBX Administrator Guide - Manual (Page 92)

IPitomy IP PBX Admin Guide
2011 Copyright  IPitomy Communication, LLC 74 v4.0.1
www.ipitomy.com
Edit Selected Tab
The IP PBX system offers many ways to configure devices. This section describes an optional method using the
Auto-Discovery feature.
Figure 42 – Auto-Discovery Edit Selected Functions
The following table describes the fields and functions available on the Edit Selected Tab of the Auto-Discovery
page:
Fields Description Commands
Phone?
Create
Create new extensions for selected phones. You can upload
extension details in a file or manually enter information. NO
Assign
Assign existing extensions to selected phones.
NO
Unassign
Removes the configuration file for the phone and all association
between the extension and the phone. NO
Unassign &
Default
Same as Unassign but also sends a Factory Default instruction to
the phone.
YES
Table 25 – Auto-Discovery Edit Selected Tab Functions and Descriptions
Create, Assign and Configure Phone
The following outlines steps to create, assign and configure a device.
!
IMPORTANT: This assumes that the phones are in a FACTORY
DEFAULTED state.
IPitomy recommends using the CSV upload file and the IP550
phone type which will help to simplify the setup and auto
configuration process.