IPitomy IP1100+ PBX Administrator Guide User Manual
Page 176
IPitomy IP PBX Admin Guide
2011 Copyright IPitomy Communication, LLC
158
v4.0.1
www.ipitomy.com
Network Time
Server
This is the location of the PBX time server. If nothing is entered in the field,
the PBX is using the default value of time.nist.gov.
Time Server Info
Below the Network Time Server field is a display showing information about
the system’s connection to its time server.
Table 59 – PBX Time Settings and Descriptions
Set Time Settings
STEPS:
1
From the PBX Setup
General System Setup page, locate the Time Settings
panel.
2
Set the Timezone to match your location.
3
If needed, set the Network Time Server to the desired address. Typically the default
value will work.
4
Click the
button to save the changes.
5
Click the Apply Changes link located at the top right hand corner of the page, to
commit the changes to the database.