IPitomy IP1100+ PBX Administrator Guide - Manual (Page 89)

IPitomy IP PBX Admin Guide
2011 Copyright  IPitomy Communication, LLC 71 v4.0.1
www.ipitomy.com
STEPS:
1 From the Edit Extensions page, locate the extension that you want to update. Click the
(edit extensions) icon to the right of the name.
2 The Extension Detail page appears. Select the link to open the Advanced
Settings page.
3 Click on the Numbers and Settings button under the Follow-Me section of the
Advanced page.
4 The Administrator View – Follow-Me Settings/Extensions window appears.
5 Make the necessary changes in the Follow-Me parameters. Click on the SAVE button to
save the changes to the Follow-Me settings. A message confirming the changes will
appear.
6 Click the EXIT button to close the window.
7 Click button to save the changes. The system returns you to the Edit
Extensions page.
8 Click the Apply Changes link located at the right hand corner of the top of the page, to
commit the changes to the database.
Provisioning - Auto-Discovery Tab
This network discovery tool will automatically detect new devices that have been added to the network. This
feature helps identify phones and other devices connected to the network and allow you to configure networked
phones. The IP PBX system provides you with the option to either scan the network, or if a scan has been done
recently, you could select No Scan to save time.
Figure 39 – Extensions Auto-Discovery Tab
Start Auto-Discovery Scan
This section describes how to start the Auto-Discovery scan for active devices on the network.
STEPS:
1 From the Destination Extensions page, click the Auto-Discovery Tab.
2 Select to either Scan or Not Scan the network and an Alert message indicating that the
system is scanning the network for active devices appears.
3 Once the scanning process is complete, the system will display a list of active devices
and assigned values such as IP Address, Device Type, Status, etc. Devices that appear