IPitomy IP1100+ PBX Administrator Guide - Manual (Page 76)

IPitomy IP PBX Admin Guide
2011 Copyright  IPitomy Communication, LLC 58 v4.0.1
www.ipitomy.com
Enable/Disable Forward Settings
The following outlines steps to enable or disable forward settings:
STEPS:
1 Pick the setting to be modified – Unconditional, Busy, No Answer or Unavailable.
2 Select Enabled or Disabled. Disabled turns the forward setting off. Enabled turns the
forward setting on.
3 Select either Phone Number or Destination. Phone Number allows you to enter the digits
you want dialed, like a PSTN number. Destination will bring up the standard dropdown
list of destinations in the system; Extensions, Groups, etc.
4 Enter the Phone Number or select the Destination you would like the PBX to route to
when meeting the forwarding requirements.
5 Click button to save the changes. The system returns you to the Edit
Extensions page.
6 Click the Apply Changes link located on the right hand corner of the page, to commit the
changes to the database.
Change Unconditional Forwarding via Keypad
STEPS:
Only unconditional forwarding can be changed from a touch-tone keypad. Enter the following code to
set the unconditional forwarding setting.
1 Dial *90 to disable forwarding.
2 Dial *91 to enable forwarding.
3 Dial *92 to set the forwarding number.