IPitomy IP1100+ PBX Administrator Guide User Manual

Page 60

Advertising
background image

IPitomy IP PBX Admin Guide

2011 Copyright  IPitomy Communication, LLC

42

v4.0.1

www.ipitomy.com


The following table describes the fields and functions available on the SIP Provider Configuration page:

Sections/Fields

Description

SIP Provider Section

Name

Name assigned to the SIP Provider. If given a username, this needs to match
that field.

User Type

User type of the associated SIP Provider. This can be User, Friend, or Peer.

DTMF Mode

DTMF tone for the trunk. This can be Inband, rfc2833, info, or auto.

RFC2833
Compensate

This advanced feature is sometimes necessary when using RFC2833 is
problematic or if the SIP provider has indicated that it is required.

Host

The domain or IP address associated with the SIP host.

Port

If your SIP provider requires registration on a port other than the default
5060, set this field to Custom and enter that port value; otherwise set to
Default.

NOTE: Be sure to forward this alternate port in your router or the traffic will not
be passed through.

Register

Registration option for the SIP Provider.

YES = Automatically generates based upon provided settings

NO = Doesn’t require authentication from the SIP Provider

CUSTOM =Allows for any special authentication rules required from the
SIP Provider

Authentication

Authentication (previously “Authorization”) requirements for the SIP Provider.

YES = Automatically generates based upon provided settings

NO = Doesn’t require authentication from the SIP Provider

CUSTOM =Allows for any special authentication rules required from the
SIP Provider

Authorized User

Some providers require a different Authorization User Name than the
Username provided. The sample asterisk configuration from your provider
will let you know if this field needs to be set to Custom; otherwise set to
Default.

From User

The sample asterisk configuration from your provider will let you know if this
field needs to be set to Custom; otherwise set as Default.

From Domain

This parameter is rarely used and if needed, the SIP Domain information can
be obtained from your SIP Provider

Realm

If your provider requires you to set the Realm to something other than
asterisk, set to Custom and enter the realm given; otherwise this can be set
to Default.

Outbound Proxy

Enable if the SIP Provider requires you to provide a different outbound IP
address, otherwise leave as Default.

Username

Username used for Registration and Authentication.

Secret

The password used for SIP Registration and Authentication.

Advertising