Lenze PLC Designer PLC-Designer (R2-x) SoftMotion - Manual (Page 12)

L-force | PLC Designer - SoftMotion
About this documentation
Conventions used
12
L
DMS 5.2 EN 03/2011 TD17
1.4 Conventions used
This documentation uses the following conventions to distinguish between different types
of information:
Type of information Writing Examples/Notes
Spelling of numbers
Decimal separator Point Generally the decimal point is used.
For example: 1234.56
Text
Version information Text colour blue All pieces of information that only apply to or from a
specific software version of the controller are
highlighted accordingly in this documentation.
Example: This function extension is available from
software version V3.0 onwards!
Program name » « The Lenze PC software »PLC Designer«
Window Italics The Message window... / The Options dialog box...
Variable identifiers Set bEnable to TRUE to...
Control element Bold The OK button... / The Copy command... / The
Properties tab... / The Name input field...
Sequence of menu
commands
If several commands must be used in sequence to
carry out a function, the individual commands are
separated by an arrow: Select File  Open to...
Shortcut <Bold> Press <F1> to open the online help.
If a command requires a combination of keys, a "+" is
placed between the key symbols: With
<Shift>+<ESC>...
Program code Courier
IF var1 < var2 THEN
a = a + 1
END IF
Keyword Courier bold
Hyperlink Underlined Optically highlighted reference to another topic. Is
activated via mouse-click in this documentation.
Symbols
Page reference ( 12) Optically highlighted reference to another page. Is
activated via mouse-click in this documentation.
Step-by-step instructions  Step-by-step instructions are indicated by a
pictograph.