15 settings via global variables, Settings via global variables – Lenze PLC Designer PLC-Designer (R2-x) SoftMotion User Manual
Page 201
Advertising
L-force | PLC Designer - SoftMotion
The SM_CNC.lib library
Settings via global variables
201
L
DMS 5.2 EN 03/2011 TD17
7.15
Settings via global variables
Certain internal variables and constants are defined in "SoftMotion_CNC_Globals" (see
Resources under the SM_CNC.lib library entry). Some of these variables and constants can
be changed:
Examination for zero (change epsilon values for zero):
g_fSMC_CNC_EPS (epsilon value for accurate examination for zero)
g_fSMC_CNC_EPS_RELUCTANT (epsilon value for tolerant examination for zero)
Advertising