16 write outqueue to file, Write outqueue to file – Lenze PLC Designer PLC-Designer (R2-x) SoftMotion User Manual
Page 76
Advertising
L-force | PLC Designer - SoftMotion
CNC editor
Starting the CNC editor, inserting and managing CNC programs
76
L
DMS 5.2 EN 03/2011 TD17
4.2.16
Write OutQueue to File
You can use this function to convert the entire CNC program into an OutQueue (i.e. a list of
GEOINFO structure objects) and save this list in a file which then can be downloaded to the
control's file system and read in during runtime (c). We recommend that you adopt this
approach if you have CNC programs which are too big for the control's global data memory
or which need to be exchanged without making changes to the »PLC Designer« project.
Advertising