Appendix b, Dimensions – Rockwell Automation 1336F PLUS II User Manual - Firmware 1.xxx-6.xxx User Manual
Page 175
Advertising
Appendix
B
Dimensions
Appendix B provides detailed dimension information for the 1336
PLUS. Included are:
• IP 20 (NEMA Type 1) Dimensions.
• IP65/54 (NEMA Type 4/12) Dimensions.
• Heat Sink-through-the-Back Cutout Dimensions.
• TB1 Terminal Block Dimensions for D, E & G Frame Drives.
• Typical Mounting of F and G Frame Open Chassis Drives in a User
Supplied Enclosure.
Important: The dimensions given on the following drawings are for
estimating purposes only. Contact your Allen-Bradley
Sales Office if certified drawings are required.
Advertising