Rockwell Automation 1336F PLUS II User Manual - Firmware 1.xxx-6.xxx - Manual (Page 192)

B–18 Dimensions
TB1 Dimensions for D & E Frame Drives
69.0
(2.72)
M8 Stud (Approximate 0.313 in.) - 2 Places
Recommended Torque - 6 N-m (52 lb.-in.)
Recommended Wrench - 13 mm
50.8 x 24 (2.00 x 0.95)
Removable Bar
35.0
(1.38)
28.0
(1.10)
18.0
(0.71)
23.0
(0.91)
63.5
(2.50)
93.0
(3.66)
M10 Stud (Approximate 0.375 in.) - 2 Places
Recommended Torque - 10 N-m (87 lb.-in.)
Recommended Wrench - 17 mm
75 x 31 (2.95 x 1.22)
Removable Bar
42.0
(1.65)
35.0
(1.38)
27.0
(1.10)
31.0
(1.22)
61.5
(2.42)
Also applies to TB1 on D Frame Drives
67.0 (2.64)
32.0
(1.26)
31.5 (1.24)