ADS Environmental Services FlowShark QR 775003 A2 - Manual (Page 128)

External Power 5-5
Wiring the external power cable to the ADS Power Supply
6. Verify the following before connecting to the power source:
 Battery pack has been disconnected and removed from the
monitor and EMU.
 Communication cable is connected to both the monitor and
the EMU.
 External power cable is connected to the EMU and the
ADS Power Supply.
7. Connect the ADS Power Supply to the AC distribution device
(i.e., disconnect, fuse, or breaker box).
8. Ensure the DC ON LED is illuminated and the DC LOW LED
is out.