ADS Environmental Services FlowShark QR 775003 A2 User Manual
Page 59
3-2
ADS FlowShark IS Manual
Secure and Connect the Cables
This procedure involves
securing the sensor cables from the ring or band to the monitor
location in the manhole and connecting the sensors to the
FlowShark IS monitor.
Typical FlowShark IS flow monitor and sensor installation
This chapter contains detailed instructions for properly installing the
sensors in sanitary, storm, and combined sewer lines and manholes.
Refer to Chapter 7, Monitor Installation, for instructions on
installing the monitor in the manhole.
Note:
Manhole and sewer system work involves confined
space entry and is inherently dangerous. Therefore,
installers and technicians must comply with all federal,
state, and municipal regulations concerning confined space
entry. ADS is not responsible for any injuries, damages,
claims, or liability resulting directly or indirectly from the
use of this installation guide or the installation of any ADS
equipment.