ADS Environmental Services FlowShark QR 775003 A2 User Manual
Page 193
Advertising
8-8
ADS FlowShark IS Manual
FlowShark IS 9-volt battery pack inside canister
7. (applies only to the 9-volt battery pack) Mark the edge of the
canister to identify the location of the battery cable standoff
(the small pipe protruding from the top of the battery pack).
8. Remove the old battery pack from the canister using the white
plastic handle attached to the top of the pack.
9. (applies only to the 12-volt battery pack) Lift off the retainer
plug from the top of the battery pack, and disconnect the PCB
from the battery pack in the following way:
Advertising