Altera High-Speed Development Kit, Stratix GX Edition - Manual (Page 48)

5–4 Quartus II Version 3.0 Altera Corporation
Set Up the Board High-Speed Development Kit, Stratix GX Edition User Guide
Figure 5–4. Connnect the Long SMA Cables to the Edge Launch Connectors
Figure 5–5. Attach Short SMA Cables to the Vertical Launch Connectors
6. Attach the HM-Zd XCVR loopback card (labeled J1 on the card) to
the HM-Zd transceiver connector as shown in Figure 5–6.