Daktronics Show Control System - Manual (Page 110)

103 Daktronics Show Control System Audio
Note: Link to Library functionality is only available for DMP-8000s with firmware that
supports the feature. If a DMP-8000 does not contain supporting firmware, this
functionality will not appear in the user interface.
1. Begin at the Quick Display Container Properties. To access the Quick Display Container
Properties, either:
a. Create an audio container , or
b. Right-click from within an audio container, and click Properties.
2. In the Audio Container Properties screen, click the Link To Library button to open the Library
Browser window.
3. In the Library Browser window, select the name of the library you wish to link to the container and
then click Open. The Link To Library button will now read Unlink From Library and the library name
will appear next to the button.
4. Click Save. The Audio Container Properties screen will close and Display Studio will automatically
create buttons for all files in the library.