Daktronics Show Control System User Manual
Page 96
Advertising
89
Daktronics Show Control System
Scripting
e. Enter the letter of the Drive (e.g. “C” or “D” (without quotes)) in which the file you wish to play is
stored.
f. Click the
button on the File line to open the File Browser window. Locate the file you wish to
play and click Open. The Library and File boxes will be filled in automatically.
Note: The File filename cannot exceed 32 characters.
7. After setting the custom ERTD script, proceed to complete any remaining steps for creating the script
command.
Advertising
This manual is related to the following products: