IDK MSD-54 Series Command Guide - Manual (Page 106)

MSD-54 Series Users Guide (Command Guide)
106
@GUP Get execution plane at starting up
Command
format @GUP, event_1 (, event_2･･･)
Return value
format @GUP, event_1, plane_1 (,event_2, plane_2･･･)
Parameter event_1-9 : Command execution condition
1 = COMMAND A to 9 = COMMAND I
plane_1-9 : Execution plane at start-up
0 = AUTO, 1 = PLANE A, 2 = PLANE B
Example Send
Receive
@GUP,1
@GUP,1,1
Get execution plane of COMMAND A at start-up.
COMMAND A executes PLANE A at start-up.
Related info. 8.12.3 Command link
@SIT Set ineffective time during control command
Command
format @SIT, time
Return value
format @SIT, time
Parameter time : Invalid time
0 to 999999 [Default]: 0
Example Send
Receive
@SIT,2000
@SIT,2000
Set invalid time of the command to 2000 ms (2
Seconds).
Terminated normally.
Related info. 8.12.5 Ineffective time
@GIT Get ineffective time during control command
Command
format @GIT
Return value
format @GIT, time
Parameter time : Ineffective time
0 to 999999 [Default]: 0
Example Send
Receive
@GIT
@GIT,2000
Get ineffective time at command execution.
Ineffective when command is being executed or until
2000 ms (2 Seconds) passes after the command
starts.
Related info. 8.12.5 Ineffective time