IDK MSD-54 Series Command Guide - Manual (Page 146)

MSD-54 Series Users Guide (Command Guide)
146
@GLM Get key lock target for front panel
Command format @GLM
Return value
format @GLM, channel, channel_mode, menu, memory, command, command_mode,
power
Parameter channel : Input channel selection key
channel_mode : Channel switching mode selection key
menu : Menu control key
memory : Preset load key
command : Command key
command_mode : Command mode key
power : Display power keys
0 = Not locked, 1 = Locked [Default]
Example Send
Receive
@GLM
@GLM,1,0,0,0,0,0,0
Get key lock mode of the front panel.
Only Input channel selection keys Re
locked.
Related info. 8.18.1 Key lock target
@SBZ Set buzzer
Command format @SBZ, bz
Return value
format @SBZ, bz
Parameter bz : Buzzer
0 = OFF, 1 = ON [Default]
Example Send
Receive
@SBZ,1
@SBZ,1
Set buzzer to “ON”.
Terminated normally.
Related info. 8.18.2 Key buzzer
@GBZ Get buzzer
Command format @GBZ
Return value
format @GBZ, bz
Parameter bz : Buzzer
0 = OFF, 1 = ON [Default]
Example Send
Receive
@GBZ
@GBZ,1
Get buzzer.
Buzzer is set to “ON”.
Related info. 8.18.2 Key buzzer