IDK MSD-54 Series Command Guide - Manual (Page 69)

MSD-54 Series Users Guide (Command Guide)
69
@SIL Set relative value of audio input level
Command
format @SIL, ch_1, updown_1 (, ch_2, updown_2･･･)
Return value
format @SIL, ch_1, updown_1 (, ch_2, updown_2･･･)
Parameter ch_1-9 : Input channel
0 = All inputs, 1 = IN1 to 9 = IN9
updown_1-9 : Set relative value
-60 to +60
The specified value is added to the current audio input level. If the total value
exceeds the limit value (-60 to +0), the limit value will be applied.
Example Send
Receive
@SIL,1,-1
@SIL,1,-1
Lower audio input level (1 dB) of OUT1.
Terminated normally.
Related info. 8.8.4 Input level
@GIL Get limit status of audio input level
Command
format @GIL
Return value
format @GIL, in_1, in_2, in_3, in_4, in_5, in_6, in_7, in_8, in_9
Parameter in_1-9 : Limits of audio input level of each input channel
-1 = Min. set value (-60 dB), 0 = Not limited, 1 = Max. set value (±0 dB)
Example Send
Receive
@GIL
@GIL,1,0,0,0,0,0,0,0,0
Get limits of input offset.
IN1: Max. value; other inputs: Not limited.
Related info. 8.8.4 Input level
@SLO Set output lip sync
Command
format @SLO, ch_1, frame_1 (, ch_2, frame_2･･･)
Return value
format @SLO, ch_1, frame_1 (, ch_2, frame_2･･･)
Parameter ch_1-4 : Output channel
0 = All outputs, 1 = OUT1 to 4 = OUT4
frame_1-4 : Lip Sync
0 to 8 [Default]: 0
Example Send
Receive
@SLO,4,2
@SLO,4,2
Set lip sync of OUT4 to 2 frames.
Terminated normally.
Related info. 8.8.5 Output lip sync