IDK MSD-54 Series Command Guide - Manual (Page 44)

MSD-54 Series Users Guide (Command Guide)
44
@SOC Set output contrast
Command
format @SOC, ch_1, red_1, green_1, blue_1 (, ch_2, red_2, green_2, blue_2･･･)
Return value
format @SOC, ch_1, red_1, green_1, blue_1 (, ch_2, red_2, green_2, blue_2･･･)
Parameter ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
red_1-4 : Output contrast (Red)
green_1-4 : Output contrast (Green)
blue_1-4 : Output contrast (Blue)
0 to 200 [Default]: 100
Example Send
Receive
@SOC,1,105,100,95
@SOC,1,105,100,95 set the output contrast of OUT1 as follows:
Red: 105%, Green: 100%、Blue: 95%
Terminated normally.
Related info. 8.4.8 Output contrast
@GOC Get output contrast
Command
format @GOC, ch
Return value
format @GOC, ch, red, green, blue
Parameter ch : Output
1 = OUT1 to 4 = OUT4
red : Output contrast (Red)
green : Output contrast (Green)
blue : Output contrast (Blue)
0 to 200 [Default]: 100
Example Send
Receive
@GOC,1
@GOC,1,105,100,95
Get output contrast of OUT1.
Red: 105%, Green: 100%, Blue: 95%.
Related info. 8.4.8 Output contrast
@ODC Output default color
Command
format @ODC, ch_1 (, ch_2･･･)
Return value
format @ODC, ch_1 (, ch_2･･･)
Parameter ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
Example Send
Receive
@ODC,1
@ODC,1 Initialize the following settings of OUT1:
@SOB Set output brightness (P. 43), @SOC Set output
contrast (P. 44)
Terminated normally.
Related info. 8.4.9 Output default color