IDK MSD-54 Series Command Guide - Manual (Page 139)

MSD-54 Series Users Guide (Command Guide)
139
@SZP Set bitmap display position
Command format @SZP, ch_1, bitmap_1, position_1 (, ch_2, bitmap_2, position_2･･･)
Return value
format @SZP, ch_1, bitmap_1, position_1 (, ch_2, bitmap_2, position_2･･･)
Parameter ch_1-16 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
bitmap_1-16 : Bitmap number
0 = All bitmaps, 1 = Bitmap 1, 2 = Bitmap 2, 3 = Bitmap 3, 4 = Bitmap 4
Only registered numbers can be specified as bitmaps.
position_1-16 : Display position
0 = CENTER [Default], 1 = TOP-LEFT, 2 = BOTTOM-LEFT,
3 = TOP-RIGHT, 4 = BOTTOM-RIGHT
Example Send
Receive
@SZP,1,1,1
@SZP,1,1,1
If bitmap 1 is displayed to PUT1, display it in
upper left.
Terminated normally.
Related info. 8.16.5 Position
@GZP Get bitmap display position
Command format @GZP, ch
Return value
format @GZP, ch, position_1 (, position__2･･･)
Parameter ch : Output
1 = OUT1 to 4 = OUT4
position_1-4 : Display position of each bitmap
0 = CENTER [Default], 1 = TOP-LEFT, 2 = BOTTOM-LEFT,
3 = TOP-RIGHT, 4 = BOTTOM-RIGHT
*Registered bitmap settings are sent in order.
Example Send
Receive
@GZP,1
@GZP,1,1
Get display position of OUT1.
Display in upper left.
Send
Receive
@GZP,2
@GZP,2,1,0
If 2 bitmaps are registered, get display position of
OUT2.
Bitmap 1: upper left; Bitmap 2: center
Related info. 8.16.5 Position