IDK MSD-54 Series Command Guide - Manual (Page 43)

MSD-54 Series Users Guide (Command Guide)
43
@GSU Get black level
Command
format @GSU
Return value
format @GSU, in_1, in_2, in_3, in_4, in_5, in_6, in_7, in_8, in_9
Parameter in_1-9 : Input setup level of each input channel
-20 = -20×0.5 (-10.0%) to +20 = +20×0.5 (+10.0%) [Default]: ±0 = ±0.0%
Example Send
Receive
@GSU
@GSU,0,0,0,0,15,0,0,0,0
Get input setup level
IN5: +7.5%; other inputs: 0%.
Related info. 8.4.5 Black level
@IDC Input default color
Command
format @IDC, ch_1 (, ch_2･･･)
Return value
format @IDC, ch_1 (, ch_2･･･)
Parameter ch_1-9 : Input channel
0 = All inputs, 1 = IN1 to 9 = IN9
Example Send
Receive
@IDC,1
@IDC,1 Initialize the following settings of IN1:
@SBR Set input brightness (P. 40), @SCO Set input
contrast (P. 40), @SHU Set hue (P. 41), @SST Set
saturation (P. 42), and @SSU Set black level (P. 42)
Terminated normally.
Related info. 8.4.6 Input default color
@SOB Set output brightness
Command
format @SOB, ch_1, bright_1 (, ch_2, bright_2･･･)
Return value
format @SOB, ch_1, bright_1 (, ch_2, bright_2･･･)
Parameter ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
bright_1-4 : Output brightness
80 to 120 [Default]: 100
Example Send
Receive
@SOB,1,110
@SOB,1,110
Set output brightness of OUT1 to 110%.
Terminated normally.
Related info. 8.4.7 Output brightness
@GOB Get output brightness
Command
format @GOB
Return value
format @GOB, out_1 (, out_2 , out_3 , out_4)
Parameter out_1-4 : Output brightness of each output
80 to 120 [Default]: 100
Example Send
Receive
@GOB
@GOB,110,100,100,100
Get output brightness.
OUT1: 110%; other outputs: 100%.
Related info. 8.4.7 Output brightness