IDK MSD-54 Series Command Guide - Manual (Page 109)

MSD-54 Series Users Guide (Command Guide)
109
@STF Set flash time (Command keys and DISPLAY POWER keys)
Command
format @STF, switch_1, flash_1 (, switch_2, flash_2･･･)
Return value
format @STF, switch_1, flash_1 (, switch_2, flash_2･･･)
Parameter switch_1-13 : key type
0 = All keys, 1 to 9 = COMMAND A to I,
10 to 13 = DISPLAY1 POWER to DISPLAY4 POWER
flash_1-13 : Flash time
-1 = Flash during command execution, 0 = Not flash,
1 to 1000 = Flash for the specified time (range: 1 to 1000 seconds)
[Default]: If COMMANDs A to I: 0 (Not flash),
If DISPLAYn POWER: -1 (Flash during command execution)
Example Send
Receive @STF,4,5
@STF,4,5
COMMAND D flashes for 5 seconds after command
execution starts.
Terminated normally.
Related info. 8.12.8 Flash time (Command keys and DISPLAY POWER keys)
@GTF Get flash time (Command keys and DISPLAY POWER keys)
Command
format @GTF, switch_1 (, switch_2･･･)
Return value
format @GTF, switch_1, flash_1 (, switch_2, flash_2･･･)
Parameter switch_1-13 : key type
0 = All keys, 1 to 9 = COMMANDs A to I,
10 to 13 = DISPLAY1 POWER to DISPLAY4 POWER
flash_1-13 : Flash time
-1 = Flash during command execution, 0 = Not flash,
1 to 1000 = Flash for the specified time (range: 1 to 1000 seconds)
[Default]: If COMMANDs A to I: 0 (Not flash),
If DISPLAYn POWER: -1 (Flash during command execution)
Example Send
Receive @GTF,10
@GTF,10,-1
Get flash time of DISPLAY1 POWER.
Flashes during command execution.
Related info. 8.12.8 Flash time (Command keys and DISPLAY POWER keys)