IDK MSD-54 Series Command Guide - Manual (Page 58)

MSD-54 Series Users Guide (Command Guide)
58
@GDM Get output mode
Command
format @GDM
Return value
format @GDM, out_1 (, out_2 , out_3 , out_4)
Parameter out_1-4 : Output mode of each output
0 = DVI MODE, 1 = HDMI RGB MODE, 2 = HDMI YCbCr4:2:2 MODE,
3 = HDMI YCbCr4:4:4 MODE [Default]
Example Send
Receive
@GDM
@GDM,3,0,3,3
Get output mode.
OUT2: DVI MODE;
other outputs: HDMI YCbCr4:4:4 MODE。
Related info. 8.7.2 Output mode
@SUY Set synchronous signal output with no input video
Command
format @SUY, ch_1, sync_1 (, ch_2, sync_2･･･)
Return value
format @SUY, ch_1, sync_1 (, ch_2, sync_2･･･)
Parameter ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
sync_1-4 : Output of synchronous idle
0 = Not output, 1 = Output [Default]
Example Send
Receive
@SUY,1,1
@SUY,1,1 OUT1 outputs synchronous idle even if video signals
are not input.
Terminated normally.
Related info. 8.7.3 Synchronous signal output with no input video
@GUY Get synchronous signal output with no input video
Command
format @GUY
Return value
format @GUY, out_1 (, out_2 , out_3 , out_4 )
Parameter out_1-4 : Output of synchronous idle of each output
0 = Not output, 1 = Output [Default]
Example Send
Receive
@GUY
@GUY,1,1,0,1
Get synchronous idle output if no input video
signals.
OUT3 does not output synchronous signal but the
other outputs do.
Related info. 8.7.3 Synchronous signal output with no input video