IDK MSD-54 Series Command Guide - Manual (Page 138)

MSD-54 Series Users Guide (Command Guide)
138
@SBT Set bitmap aspect ratio
Command format @SBT, ch_1, bitmap_1, aspect_1(, ch_2, bitmap_2, aspect__2･･･)
Return value
format @SBT, ch_1, bitmap_1, aspect_1(, ch_2, bitmap_2, aspect__2･･･)
Parameter ch_1-16 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
bitmap_1-16 : Bitmap number
0 = All bitmaps, 1 = Bitmap 1, 2 = Bitmap 2, 3 = Bitmap 3,
4 = Bitmap 4
Only registered numbers can be specified as bitmaps.
aspect_1-16 : Aspect ratio
0 = AUTO, 1 = FULL, 2 = THROUGH
Example Send
Receive
@SBT,1,1,1
@SBT,1,1,1
Set aspect ratio for when bitmap 1 is output to
OUT1 to FULL.
Terminated normally.
Related info. 8.16.4 Aspect ratio
@GBT Get bitmap aspect ratio
Command format @GBT, ch
Return value
format @GBT, ch, aspect_1 (, aspect__2･･･)
Parameter ch : Output
1 = OUT1 to 4 = OUT4
aspect_1-4 : Aspect ratio of each bitmap
0 = AUTO, 1 = FULL, 2 = THROUGH
Settings of registered bitmaps are sent in order.
Example Send
Receive
@GBT,1
@GBT,1,1
Get aspect of OUT1.
FULL
Send
Receive
@GBT,2
@GBT,2,1,0
If 2 bitmaps are registered, get background color
of OUT2.
Bitmap 1: FULL; Bitmap 2: AUTO
Related info. 8.16.4 Aspect ratio