IDK MSD-54 Series Command Guide - Manual (Page 5)

MSD-54 Series Users Guide (Command Guide)
5
1 Communication specifications
1.1 Serial Port
The MSD-54 series controls peripheral devices externally by serial communication with RS-232C connector.
Connect control devices such as computers and the MSD with a serial communication cable, and then control
the MSD and acquire status using commands. For command character notations and configuring
communication of serial terminal, see sections “2 ASCII codes” in this manual and “8.10 COM Ports” in
Users Guide.
[Table 1.1] Spec of serial communication
Compliance
standard RS-232C
Baud rate 4800, 9600, 19200, 38400 [bps]
Data bit 8, 7 [bit]
Parity check None, even, odd
Stop bit 1, 2 [bit]
X parameter Invalid
Flow control None
Delimiter CR LF (Carriage return and line feed, 0D and 0A in
hexadecimal)
Communication
pattern Full duplex
[Figure 1.1] Spec of RS-232C connectors and cables