IDK MSD-54 Series Command Guide - Manual (Page 96)

MSD-54 Series Users Guide (Command Guide)
96
Example Send
Receive
@GEC,3
@GEC,3,0,512,P
OWER
STATUS,9,
47455420504F57
0D0A,
2000,2,200,0,1,0
D
Get the control command 3.
・
Delay : 0 ms
・ Output port : LAN 8
・ Memo : POWER STATUS
・ Data size : 9 bytes
・ Command data : GET POWCR LF (ASCII codes)
・ TimeOUT : 2000 ms
・ Retry : 2 times
・ Interval : 200 ms
・ Retry over : Stop
・ Received data : Display with ASCII codes
・ Delimiter : 0D=Hexadecimals (CR =ASCII
codes)
Send
Receive
@GEC,4
@GEC,4,0,128,I
NPUT,7,
494E53454C0D0
A,2500,4,
100,1,2,100
Get control command 4.
・
Delay : 0 ms
・ Output port : LAN 6
・ Memo : INPUT
・ Data size : 7 bytes
・ Command data : INSELCR LF (ASCII codes)
・ TimeOUT2500 ms
・ Retry : 4 times
・ Interval : 100 ms
・ Retry over : Execute
・ Received data : Display with hexadecimals
・ Replied command : Delimiter not monitored
Related info. 8.12.1 Control commands