IDK MSD-54 Series Command Guide - Manual (Page 112)

MSD-54 Series Users Guide (Command Guide)
112
@GCM Get video and audio channel setting in cross point memory
Command
format @GCM, memory
Return value
format @GCM, memory, video _1, audio_1, (video _2, audio_2, video _3, audio_3, video
_4
, audio_4), name
Parameter memory : Cross point memory
1 to 9
video_1-4 : Video output
audio_1-4 : Audio output
-1 = Not control, 0 = OFF, 1 = IN1 to 9 = IN9
Nothing is saved in the memory as factory default, the state is “-1” (Not controlled)..
If you save only video (@SCV) or audio (@SCA) at the first saving of cross point
settings, “-1” (Not control) is replied to unsaved audio and video.
name : Memory name
Up to 10 characters using 20 to 7D. “2 ASCII codes”
Example Send
Receive
@GCM,2
@GCM,2,3,3,1
,1,2,2,-1,-1,PA
TTERN2
Get video and audio channels of cross point memory
2.
With the name, “PATTERN2”, the following settings
are saved: OUT1: IN3; OUT2: IN1; OUT3: IN2;
OUT4: Not controlled.
Related info. 8.13.3 Editing cross point
@RCV Load video channel setting from cross point memory
Command
format @RCV, memory
Return value
format @RCV, memory
Parameter memory : Cross point memory
1 to 9
Example Send
Receive
@RCV,1
@RCV,1
Load video channel of cross point memory 1.
Terminated normally.
Related info. 8.13.1 Loading cross point