IDK MSD-54 Series Command Guide - Manual (Page 84)

MSD-54 Series Users Guide (Command Guide)
84
@GSB Get subnet mask
Command
format @GSB
Return value
format @GSB, unit_1, unit_2, unit_3, unit_4
Parameter unit_1 : Upper bit of the subnet mask to unit_4 : Lower bit of the subnet mask
0 to 255 = 8 bit (Decimal notation) [Default]: 255.255.255.000
Example Send
Receive
@GSB
@GSB,255,255,192,0
Get subnet mask.
Subnet mask: 255.255.192.0 (=18 bit).
Related info. 8.11.2 Subnet mask
@SGW Set gateway address
Command
format @SGW, unit_1, unit_2, unit_3, unit_4
Return value
format @SGW, unit_1, unit_2, unit_3, unit_4
Parameter unit_1 : Upper bit of the gateway address to unit_4 : Lower bit of the gateway
address
0 to 255 = 8 bit (Decimal notation) [Default]: 192.168.001.200
Example Send
Receive
@SGW,192,168,1,254
@SGW,192,168,1,254
Set gateway address to “192.168.1.254”.
Terminated normally.
Related info. 8.11.3 Gateway address
Note After IP address or serial communication setting is changed, communication may be
disabled. Change environmental settings based on the settings of the MSD.
@GGW Get gateway address
Command
format @GGW
Return value
format @GGW, unit_1, unit_2, unit_3, unit_4
Parameter unit_1 : Upper bit of the gateway address to unit_4 : Lower bit of the gateway
address
0 to 255 = 8 bit (Decimal notation) [Default]: 192.168.001.200
Example Send
Receive
@GGW
@GGW,192,168,1,254
Get gateway address
Gateway address:“192.168.1.254”
Related info. 8.11.3 Gateway address