IDK MSD-54 Series Command Guide - Manual (Page 115)

MSD-54 Series Users Guide (Command Guide)
115
@SCA Overwrite audio channel setting in cross point memory
Command
format @SCA, memory (, name)
Return value
format @SCA, memory (, name)
Parameter memory : Cross point memory
1 to 9
name : Memory name
Up to 10 characters using 20 to 7D. “2 ASCII codes”
If you do not specify memory name, only cross point settings are saved without
changing the memory name.
Example Save current audio channels in cross point memory 2.
Send
Receive
@SCA,2
@SCA,2
Not specify memory name
Send
Receive
@SCA,2,PATTERN2
@SCA,2,PATTERN2
Specify memory name
Related info. 8.13.2 Saving cross point
@SEA Save audio channel setting in cross point memory
Command
format @SEA, memory (, name)
Return value
format @SEA, memory (, name)
Parameter memory : Cross point memory
1 to 9
name : Memory name
Up to 10 characters using 20 to 7D. “2 ASCII codes”
If you do not specify memory name, only cross point settings are saved without
changing the memory name.
Example Save the current audio channels to cross point memory 2. The settings of output
whose channel control is disabled is not saved.
Send
Receive
@SEA,2
@SEA,2
Not specify memory name
Send
Receive
@SEA,2,PATTERN2
@SEA,2,PATTERN2
Specify memory name
Related info. 8.13.2 Saving cross point