IDK MSD-54 Series Command Guide - Manual (Page 70)

MSD-54 Series Users Guide (Command Guide)
70
@GLO Get output lip sync
Command
format @GLO
Return
value
format @GLO, out_1 (, out_2, out_3, out_4 )
Parameter out_1-4 : Lip sync of each output
0 to 8 [Default]: 0
Example Send
Receive
@GLO
@GLO,0,0,0,2
Get output lip sync.
OUT4: 2 frames; other outputs: 0 frame
Related
info. 8.8.5 Output lip sync
@SLY Set input lip sync
Command format @SLY, ch_1, frame_1 (, ch_2, frame_2･･･)
Return value
format @SLY, ch_1, frame_1 (, ch_2, frame_2･･･)
Parameter ch_1-9 : Input channel
0 = All inputs, 1 = IN1 to 9 = IN9
frame_1-9 : Lip sync
0 to 8 [Default]: 0
Example Send
Receive
@SLY,4,2
@SLY,4,2
Set lip sync of IN4 to 2 frames.
Terminated normally.
Related info. 8.8.6 Input lip sync
@GLY Get input lip sync
Command format @GLY
Return value
format @GLY, in_1, in_2, in_3, in_4, in_5, in_6, in_7, in_8, in_9
Parameter in_1-9 : Lip sync of each input channel
0 to 8 [Default] 0
Example Send
Receive
@GLY
@GLY,0,0,0,2,0,0,0,0,0
Get lip sync.
IN4: 2 frames; other inputs: 0 frame
Related info. 8.8.6 Input lip sync
@SSF Set sampling frequency of analog audio input
Command format @SSF, ch_1, frequency_1 (, ch_2, frequency_2･･･)
Return value
format @SSF, ch_1, frequency_1 (, ch_2, frequency_2･･･)
Parameter ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
frequency_1-4 : Sampling frequency
0 = AUTO [Default], 1 = 32 kHz, 2 = 44.1 kHz, 3 = 48 kHz, 4 = 96
kHz,
5 = 192 kHz
Example Send
Receive
@SSF,1,3
@SSF,1,3
Set sampling frequency of OUT1 to 48 kHz.
Terminated normally.
Related info. 8.8.7 Sampling frequency of analog audio input