IDK MSD-54 Series Command Guide - Manual (Page 110)

MSD-54 Series Users Guide (Command Guide)
110
3.3.14 Preset memory
@RCM Load video and audio channel setting from cross point memory
Command
format @RCM, memory
Return value
format @RCM, memory
Parameter memory : Cross point memory
1 to 9
Example Send
Receive
@RCM,1
@RCM,1 Load the video and audio channels of cross point
memory 1.
Terminated normally.
Related info. 8.13.1 Loading cross point
@SCM Overwrite video and audio channel setting in cross point memory
Command
format @SCM, memory (, name)
Return value
format @SCM, memory (, name)
Parameter memory : Cross point memory
1 to 9
name : Memory name
Up to 10 characters using 20 to 7D. “2 ASCII codes”
If you do not specify memory name, only cross point settings are saved without
changing the memory name.
Example Save the current video and audio channels to cross point memory 2.
Send
Receive
@SCM,2
@SCM,2
Not specify memory name
Send
Receive
@SCM,2,PATTERN2
@SCM,2,PATTERN2 Specify memory name
Related info. 8.13.2 Saving cross point