IDK MSD-54 Series Command Guide - Manual (Page 63)

MSD-54 Series Users Guide (Command Guide)
63
@SHR Set the number of HDCP retries
Command
format @SHR, ch_1, retry_1 (, ch_2, retry_2･･･)
Return value
format @SHR, ch_1, retry_1 (, ch_2, retry_2･･･)
Parameter ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
retry_1-4 : the number of retries
-1 = Retry until succeed (ETERNITY [Default]), 0 = Not retry,
1 to 100 = Retry for arbitrary number of retries
Example Send
Receive
@SHR,4,10
@SHR,4,10
OUT4: Retry for up to 10 times (max.).
Terminated normally.
Related info. 8.7.9 The number of HDCP retries
@GHR Get the number of HDCP retries
Command
format @GHR
Return value
format @GHR, OUT1 (, OUT2, OUT3, OUT4)
Parameter out_1-4 : The number of retries of each output
-1 = Retry until succeeding (ETERNITY [Default]), 0 = Not retry,
1 to 100 = Retry for arbitrary number of retries
Example Send
Receive
@GHR
@GHR,-1,-1,-1,10
Get HDCP error retry.
OUT4: Retry for up to 10 times;
other outputs: continue to retry until succeed
Related info. 8.7.9 The number of HDCP retries
@SDC Set Deep Color
Command
format @SDC, ch_1, color_1 (, ch_2, color_2･･･)
Return value
format @SDC, ch_1, color_1 (, ch_2, color_2･･･)
Parameter ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
color_1-4 : Color depth
0 = 24-BIT COLOR [Default], 1 = 30-BIT COLOR
Example Send
Receive
@SDC,1,0
@SDC,1,0
Set OUT1 to 24-BIT COLOR.
Terminated normally.
Related info. 8.7.10 Deep Color