IDK MSD-54 Series Command Guide - Manual (Page 57)

MSD-54 Series Users Guide (Command Guide)
57
3.3.8 Output settings
@SEQ Set output equalizer
Command
format @SEQ, ch_1, level_1, (, ch_2, level_2･･･)
Return value
format @SEQ, ch_1, level_1, (, ch_2, level_2･･･)
Parameter ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
level_1-4 : Output equalizer
0 = OFF [Default], 1 = LOW, 2 = MIDDLE, 3 = HIGH
Example Send
Receive
@SEQ,1,0
@SEQ,1,0
Set output equalizer of OUT1 to “OFF”.
Terminated normally.
Related info. 8.7.1 Output equalizer
@GEQ Get output equalizer
Command
format @GEQ
Return value
format @GEQ, out_1, (, out_2 , out_3, out_4)
Parameter out_1-4 : Output equalizer of each output
0 = OFF [Default], 1 = LOW, 2 = MIDDLE, 3 = HIGH
Example Send
Receive
@GEQ
@GEQ,0,1,0,0
Get output equalizer.
OUT2 is LOW and the other outputs are OFF.
Related info. 8.7.1 Output equalizer
@SDM Set output mode
Command
format @SDM, ch_1, mode_1 (, ch_2, mode_2･･･)
Return value
format @SDM, ch_1, mode_1 (, ch_2, mode_2･･･)
Parameter ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
mode_1-4 : Output mode
0 = DVI MODE, 1 = HDMI RGB MODE, 2 = HDMI YCbCr4:2:2 MODE,
3 = HDMI YCbCr4:4:4 MODE [Default]
Example Send
Receive
@SDM,1,3
@SDM,1,3
Set output mode of OUT1 to HDMI YCbCr4:4:4
MODE.
Terminated normally.
Related info. 8.7.2 Output mode