IDK MSD-54 Series Command Guide - Manual (Page 141)

MSD-54 Series Users Guide (Command Guide)
141
@SPB Set startup bitmap
Command
format @SPB, ch_1, out_1 (, ch_2, out_2･･･)
Return value
format @SPB, ch_1, out_1 (, ch_2, out_2･･･)
Parameter ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
out_1-4 : Bitmap output settings
0 = OFF [Default], 1 = Bitmap 1 ON, 2 = Bitmap 2 ON,
3 = Bitmap 3 ON, 4 = Bitmap 4 ON
Only the registered number can be specified as bitmaps
Example Send
Receive
@SPB,1,0
@SPB,1,0
Set OUT1 not to output a bitmap at start up.
Terminated normally.
Related info. 8.16.7 Enabling/Disabling startup bitmap
@GPB Get startup bitmap
Command
format @GPB
Return value
format @GPB, out_1 (, out_2, out_3, out_4 )
Parameter out_1-4 : Bitmap output setting of each output
0 = OFF [Default], 1 = Bitmap1 ON, 2 = Bitmap 2 ON,
3 = Bitmap 3 ON, 4 = Bitmap 4 ON
Example Send
Receive
@GPB
@GPB,0,0,0,1
Get bitmap image output for start up.
OUT4: Bitmap 1; other outputs: no bitmap is
output.
Related info. 8.16.7 Enabling/Disabling startup bitmap