IDK MSD-54 Series Command Guide - Manual (Page 27)

MSD-54 Series Users Guide (Command Guide)
27
@GOT Get output resolution
Command format @GOT
Return value
format @GOT, out_1 (, out_2 , out_3 , out_4 )
Parameter OUT1-4 : Output resolutions of each output
0 = AUTO [Default], 1 = VGA@60(640x480),
2 = SVGA@60(800x600), 3 = XGA@60(1024x768),
4 = WXGA@60(1280x768), 5 = WXGA@60(1280x800),
6 = Quad-VGA@60(1280x960), 7 = SXGA@60(1280x1024),
8 = WXGA@60(1360x768), 9 = WXGA@60(1366x768),
10 = SXGA+@60(1400x1050), 11 = WXGA+@60(1440x900),
12 = WXGA++@60(1600x900), 13 = UXGA@60(1600x1200),
14 = WSXGA+@60(1680x1050), 15 = VESAHD@60(1920x1080)
16 = WUXGA@60(1920x1200), 17 = QWXGA@60(2048x1152),
18 = [email protected](720x480), 19 = [email protected](720x480),
20 = 576i@50(720x576), 21 = 576p@50(720x576),
22 = 720p@50(1280x720), 23 = [email protected](1280x720),
24 = 720p@60(1280x720), 25 = 1080i@50(1920x1080),
26 = [email protected](1920x1080), 27 = 1080i@60(1920x1080),
28 = 1080p@50(1920x1080), 29 = [email protected](1920x1080),
30 = 1080p@60(1920x1080)
Note: For MSD-5402SL, only the resolution of OUT1 is replied.
Example Send
Receive
@GOT
@GOT,7,30,30,30
Get output resolutions
OUT1: SXGA; other outputs:1080p 60Hz
Related info. 8.3.1 Output resolutions
@GTD Get actual output resolution
Command format @GTD
Return value
format @GTD, out_1 (, out_2 , out_3 , out_4 )
Parameter OUT1-4 : Get output resolutions actually output from each channel
1 = VGA@60(640x480), 2 = SVGA@60(800x600),
3 = XGA@60(1024x768), 4 = WXGA@60(1280x768),
5 = WXGA@60(1280x800), 6 = Quad-VGA@60(1280x960),
7 = SXGA@60(1280x1024), 8 = WXGA@60(1360x768),
9 = WXGA@60(1366x768), 10 = SXGA+@60(1400x1050),
11 = WXGA+@60(1440x900), 12 = WXGA++@60(1600x900),
13 = UXGA@60(1600x1200), 14 = WSXGA+@60(1680x1050),
15 = VESAHD@60(1920x1080), 16 = WUXGA@60(1920x1200),
17 = QWXGA@60(2048x1152), 18 = [email protected](720x480),
19 = [email protected](720x480), 20 = 576i@50(720x576),
21 = 576p@50(720x576), 22 = 720p@50(1280x720),
23 = [email protected](1280x720), 24 = 720p@60(1280x720),
25 = 1080i@50(1920x1080), 26 = [email protected](1920x1080)
[Default]:
27 = 1080i@60(1920x1080), 28 = 1080p@50(1920x1080),
29 = [email protected](1920x1080), 30 = 1080p@60(1920x1080)
If set to “AUTO”, the actually output resolutions are replied. If set to other
resolutions, the set resolution is replied
Note: For MSD-5402SL, only the resolution of OUT1 is replied.
Example Send
Receive
@GTD
@GTD,29,29,26,26
Get actual output resolutions.
OUT1 and OUT2: [email protected]; other
outputs: [email protected]
Related info. 8.3.1 Output resolutions