IDK MSD-54 Series Command Guide - Manual (Page 30)

MSD-54 Series Users Guide (Command Guide)
30
@SOV Set overscan
Command
format @SOV, ch_1, overscan_1 (, ch_2, overscan_2･･･)
Return value
format @SOV, ch_1, overscan_1 (, ch_2, overscan_2･･･)
Parameter ch_1-9 : Input channel
0 = All inputs, 1 = IN1 to 9 = IN9
overscan_1-9 : Over scan
100% to 115%
[Default] of normal TV signals (NTSC/PAL/SDTV): 105%,
Signals of High Definition TV (HDTV) or PC: 100%
Example Send
Receive
@SOV,7,105
@SOV,7,105
Set over scan of IN7 to 105%.
Terminated normally.
Related info. 8.3.5 Overscan
@GOV Get overscan
Command format @GOV
Return value
format @GOV, in_1, in_2, in_3, in_4, in_5, in_6, in_7, in_8 , in_9
Parameter in_1-9 : Set input over scan of each input channel
100% to 115%
[Default]: 105% for normal TV signals (NTSC/PAL/SDTV),
100% for high-definition TV signals (HDTV) and computer signals
Example Send
Receive
@GOV
@GOV,100,100,105,100,100,100,
100,100,100
Get over scan of each input.
IN3: 105%; other inputs: 100%.
Related info. 8.3.5 Overscan
@SNP Set input position
Command
format @SNP, ch_1, h_position_1, v_position_1 (, ch_2, h_position_2, v_position_2･･･)
Return value
format @SNP, ch_1, h_position_1, v_position_1 (, ch_2, h_position_2, v_position_2･･･)
Parameter ch_1-9 : Input channel
0 = All inputs, 1 = IN1 to 9 = IN9
h_position_1-9 : Horizontal input position
-Horizontal input size to +Horizontal output resolution [Default]: 0
v_position_1-9 : vertical input position
-Vertical input size to +Vertical output resolution [Default]: 0
Note: If resolutions differ depending on output, the resolution of OUT1 will be the
standard.
Example Send
Receive
@SNP,1,-50,20
@SNP,1,-50,20 Set horizontal and vertical input positions of IN1
to -50 and +20, respectively.
Terminated normally.
Related info. 8.3.6 Input position