IDK MSD-54 Series Command Guide - Manual (Page 45)

MSD-54 Series Users Guide (Command Guide)
45
3.3.6 Input settings
@SDT Set no-signal-input monitoring
Command
format @SDT, ch_1, time_1 (, ch_2, time_2･･･)
Return value
format @SDT, ch_1, time_1 (, ch_2, time_2･･･)
Parameter ch_1-5 : Input channel
0 = All digital inputs, 1 = IN1 to 5 = IN5
time_1-5 : Monitoring time
0 = OFF, 2000 = 2 seconds to 15000 = 15 seconds [Default] 10000 = 10
seconds
Set the value by 100 ms. If you set a value other than 0 for the lower 2 digits,
these values will be rounded down.
(For example, if you set it to 2955, the monitoring time is set to 2900ms.)
Example Send
Receive
@SDT,3,6000
@SDT,3,6000
Set monitoring time of IN3 to 6000 ms (6 seconds).
Terminated normally.
Related info. 8.5.1 No-signal input monitoring
@GDT Set no-signal-input monitoring
Command
format @GDT
Return value
format @GDT, in_1, in_2, in_3, in_4, in_5
Parameter in_1-5 : Monitoring time of each input channel
0 = OFF, 2000 = 2 seconds to 15000 = 15 seconds [Default]: 10000 = 10
seconds
Example Send
Receive
@GDT
@GDT,6000,10000,
10000,4000,4000
Get monitoring time of input video signals.
IN1: 6000ms (6 seconds), IN2 and IN3:
10000ms (10 seconds), IN4 and IN5: 4000ms
(4 seconds).
Related info. 8.5.1 No-signal input monitoring
@SHE Set HDCP input enabled/disabled
Command
format @SHE, ch_1, hdcp_1 (, ch_2, hdcp_2･･･)
Return value
format @SHE, ch_1, hdcp_1 (, ch_2, hdcp_2･･･)
Parameter ch_1-5 : Input channel
0 = All digital inputs, 1 = IN1 to 5 = IN5
hdcp_1-5 : Enable/disable HDCP input
0 = DISABLE, 1 = ENABLE [Default]
Example Send
Receive
@SHE,1,0
@SHE,1,0
Disable HDCP input to IN1.
Terminated normally.
Related info. 8.5.2 HDCP input enabled/disabled