IDK MSD-54 Series Command Guide User Manual
Page 79
MSD-54 Series Users Guide (Command Guide)
79
@SSP Set
speaker
configuration
Command
format
@SSP, ch, number (, speaker_1, speaker_2･･･)
Return value
format
@SSP, ch, number (, speaker_1, speaker_2･･･)
Parameter
ch
: Input channel
0 = All digital inputs, 1 = IN1 to 5 = IN5
number
: Speakers
1 to 8 [Default]: 2
speaker_1-8
: Speakers to be used
0 = Front Left/Right [Default], 1 = Low Frequency Effect,
2 = Front Center, 3 = Rear Left/Right, 4 = Rear Center,
5 = Front Left/Right Center, 6 = Rear Left/Right Center,
7 = Front Left/Right Wide, 8 = Front Left/Right High,
9 = Top Center, 10 = Front Center High
If pretermitting speaker_1-8, settings are done according to the settings
of ”number”
number
speaker
0
1
2
3
4
5
6
7
8
9
10
1
OFF
OFF
O N
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
2
O N
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
3
O N
O N
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
4
O N
O N
O N
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
5
O N
O N
OFF
O N
OFF
OFF
OFF
OFF
OFF
OFF
OFF
6
O N
O N
O N
O N
OFF
OFF
OFF
OFF
OFF
OFF
OFF
7
O N
O N
O N
O N
O N
OFF
OFF
OFF
OFF
OFF
OFF
8
O N
O N
O N
O N
OFF
OFF
O N
OFF
OFF
OFF
OFF
If you specify speaker_1-8 and the number and total number of speakers
(speaker_1-8) do not match, the number is set automatically. In case the number
exceeds the settable range, an error is replied.
Example Send
Receive
@SSP,1,8
@SSP,1,8
Set the number of speakers of IN1 to 8. (The
speakers are configured as shown in
number
=8 of the chart above.)
Terminated normally.
Send
Receive
@SSP,2,6,0,1,2,3
@SSP,2,6,0,1,2,3
Set IN2 to use 6 speakers as follows:
Front Left/Right, Low Frequency Effect, Front
Center, Rear Left/Right
Terminated normally.
Send
Receive
@SSP,3,8,0,3,5,6,7
@ERR,1
Set IN3 to use following speakers;
Front Left/Right, Rear Left/Right, Front
Left/Right Center, Rear Left/Right Center,
Front Left/Right Wide
The total number of speakers is 10, which
exceeds the limit of settable value.
Related info.
8.9.6 Speaker configuration