IDK MSD-54 Series Command Guide - Manual (Page 87)

MSD-54 Series Users Guide (Command Guide)
87
@SLP Set TCP port number
Command
format @SLP, connection_1, port_1 (, connection_2, port_2･･･)
Return value
format @SLP, connection_1, port_1 (, connection_2, port_2･･･)
Parameter connection_1-8 : Connection number
0 = All connections, 1 = Connections 1 to 8 = Connection 8
port_1-8 : Port number
23, 80, 1100, 5000 to 5999, 6000 to 6999
[Default]: Connection 1 to 3 = 1100, Connection 4 to 6 = 23,
Connection 7 to 8 = 80
Example Send
Receive
@SLP,8,6000
@SLP,8,6000
Set port number of connection 8 to 6000.
Terminated normally.
Related info. 8.11.5 TCP port number
Note
After IP address or serial communication setting is changed, communication may be
disabled. Change environmental settings based on the settings of the MSD.
@GLP Get TCP port number
Command
format @GLP
Return value
format @GLP, connection_1, connection_2, connection_3, connection_4, connection_5,
connection_6
, connection_7, connection_8
Parameter connection _1-8 : Port numbers of each connections
23, 80, 1100, 5000 to 5999, 6000 to 6999
[Default]: Connections 1 to 3 = 1100, Connections 4 to 6 = 23,
Connections 7 to 8 = 80
Example Send
Receive
@GLP
@GLP,1100,1100,1100,
23,23,23,80,80
Get port number.
Connections 1 to 3: 1100; connections 4 to 6:
23; connections 7 and 8: 80.
Related info. 8.11.5 TCP port number
@GMC Get MAC address
Command
format @GMC
Return value
format @GMC, unit_1, unit_2, unit_3, unit_4, unit_5, unit_6
Parameter unit_1 : Upper but of the MAC address to unit_6 : Lower bit of the MAC address
00 to FF = 8 bit (in hexadecimal)
Example Send
Receive
@GMC
@GMC,00,08,E5,55,00,01
Get MAC address.
Reply MAC address.
Related info. 8.11.6 Displaying MAC address