H3C Technologies H3C SecBlade NetStream Cards - Manual (Page 160)

145
Complete these tasks to configure NetStream:
Task Remarks
Enabling IPv4 NetStream Required
Configuring ACL-based NetStream filtering Optional
Configuring IPv4 NetStream sampling Optional
Configuring IPv4 NetStream
data export
Configuring IPv4 NetStream traditional data
export
Required
Use at least one approach.
Configuring NetStream aggregation data
export
Configuring attributes of IPv4 NetStream export data Optional
Configuring IPv4 NetStream flow aging Optional
Enabling DSA-TAG field parsing Optional
Enabling IPv4 NetStream
Enabling IPv4 NetStream on an interface
Follow these steps to enable NetStream on an interface:
To do… Use the command… Remarks
Enter system view system-view —
Enter interface view interface interface-type interface-number —
Enable IPv4 NetStream on the
interface
ip netstream { inbound | outbound }
Required
Disabled by default.
The outbound keyword does not
take effect for SecBlade
NetStream cards.
Configuring IPv4 NetStream filtering and sampling
Before you configure IPv4 NetStream filtering and sampling, use the ip netstream command to enable
IPv4 NetStream.
Configuring ACL-based NetStream filtering
Follow these steps to configure ACL-based IPv4 NetStream filtering:
To do… Use the command… Remarks
Enter system view system-view —
Enter interface view interface interface-type interface-number —