H3C Technologies H3C SecBlade NetStream Cards - Manual (Page 281)

266
To do… Use the command… Remarks
Configure the format of the
time stamp info-center timestamp { debugging |
log | trap } { boot | date | none }
Optional
The time stamp format for log, trap and
debugging information is date by
default.
Enabling the display of system information on the console
After setting to output system information to the console, you need to enable the associated display
function to display the output information on the console.
Follow these steps in user view to enable the display of system information on the console:
To do… Use the command… Remarks
Enable the monitoring of system
information on the console
terminal monitor
Optional
Enabled on the console and disabled on the
monitor terminal by default.
Enable the display of debugging
information on the console
terminal debugging
Required
Disabled by default
Enable the display of log
information on the console
terminal logging
Optional
Enabled by default
Enable the display of trap
information on the console
terminal trapping
Optional
Enabled by default
Outputting system information to a monitor terminal
System information can also be output to a monitor terminal, which is a user terminal that has login
connections through the AUX or VTY user interface.
Outputting system information to a monitor terminal
To do… Use the command… Remarks
Enter system view system-view —
Enable information center info-center enable
Optional
Enabled by default
Name the channel with a
specified channel number info-center channel channel-number
name channel-name
Optional
See
Table 19 for default channel
names.
Configure the channel
through which system
information can be output to a
monitor terminal
info-center monitor channel
{ channel-number | channel-name }
Optional
By default, system information is output
to the monitor terminal through channel
1 (known as monitor).