H3C Technologies H3C SecBlade NetStream Cards - Manual (Page 167)

152
IPv6 NetStream configuration
This chapter includes these sections:
• IPv6 NetStream configuration task list
• Displaying and maintaining IPv6 NetStream
IPv6 NetStream configuration task list
Before you configure IPv6 NetStream, determine the following proper configurations as needed.
• Make sure on which device you want to enable IPv6 NetStream.
• Configure the timer for IPv6 NetStream flow aging.
• To reduce the bandwidth consumption used by IPv6 NetStream data export, configure IPv6
NetStream aggregation.
Complete these tasks to configure IPv6 NetStream:
Task Remarks
Enabling IPv6 NetStream Required
Configuring IPv6 NetStream data
export
Configuring IPv6 NetStream
traditional data export
Required
Select a command as required
Configuring IPv6 NetStream
aggregation data export
Configuring attributes of IPv6 NetStream data export Optional
Configuring IPv6 NetStream flow aging Optional
Enabling IPv6 NetStream
Enabling IPv6 NetStream on an interface
Follow these steps to enable IPv6 NetStream on an interface:
To do… Use the command… Remarks
Enter system view system-view —
Enter interface view interface interface-type interface-number —
Enable IPv6 NetStream on the
interface
ipv6 netstream { inbound | outbound }
Required
Disabled by default.
This outbound keyword does not
take effect on SecBlade
NetStream cards.