H3C Technologies H3C SecBlade NetStream Cards - Manual (Page 46)

31
To do… Use the command… Remarks
Configure the data
bits
databits { 5 | 6 | 7 | 8 }
Optional
By default, the data bits of the
console port is 8.
Data bits is the number of bits
representing one character. The
setting depends on the contexts to be
transmitted. For example, you can
set it to 7 if standard ASCII
characters are to be sent, and set it
to 8 if extended ASCII characters
are to be sent.
Define a shortcut
key for enabling a
terminal session
activation-key character
Optional
By default, you can press Enter to
enable a terminal session.
Define a shortcut
key for terminating
tasks
escape-key { default | character }
Optional
By default, you can press Ctrl+C to
terminate a task.
Configure the type
of terminal display
terminal type { ansi | vt100 }
Optional
By default, the terminal display type
is ANSI.
The SecBlade card supports two
types of terminal display: ANSI and
VT100. H3C recommends you to set
the display type of both the
SecBlade card and the client to
VT100. If the SecBlade card and the
client use different display types (for
example, hyper terminal or Telnet
terminal) or both are set to ANSI,
when the total number of characters
of the currently edited command line
exceeds 80, an anomaly such as
cursor corruption or abnormal
display of the terminal display may
occur on the client.
Configure the user
privilege level for
login users
user privilege level level
Optional
By default, the default command
level is 3 for the console user
interface.
Set the maximum
number of lines on
the next screen.
screen-length screen-length
Optional
By default, the next screen displays
24 lines.
A value of 0 disables the function.
Set the size of
history command
buffer
history-command max-size value
Optional
By default, the buffer saves 10
history commands at most.