Step-by-step patch installation task list, Configuring the patch file location, Loading a patch file – H3C Technologies H3C SecBlade NetStream Cards User Manual

Page 263: Activating patches

Advertising
background image

248

Step-by-step patch installation task list

Task Remarks

Configuring the patch file location

Optional

Loading a patch file

Required

Activating patches

Required

Confirming running patches

Optional

Configuring the patch file location

If you save the patch files to another storage media except the CF card on the device, you need to specify

the directory where the patch files locate with the patch-location argument. Then the system loads the

appropriate patch files from the specified directory. If the device has only one storage media, you do not

need to execute this command.
Follow these steps to configure the patch file location:

To do…

Use the command…

Remarks

Enter system view

system-view

Configure the patch file location

patch location patch-location

Optional
cfa0:/ by default

NOTE:

If you install a patch file by specifying the directory where the patch file locates, after the patch install
command is executed, the system automatically changes patch file location specified with the patch

location command to the directory specified by the

patch-location argument of the patch install

command. For example, if you execute the patch location

xxx command and then the patch install yyy

command, the patch file location automatically changes from xxx to yyy.

Loading a patch file

Loading the correct patch files is the basis of other hotfixing operations. The system loads a patch file
from cfa0: by default.

CAUTION:

Set the file transfer mode to binary mode before using FTP or TFTP to upload/download patch files
to/from cfa0: of the device. Otherwise, patch file cannot be parsed properly.

Follow these steps to load a patch file:

To do…

Use the command…

Remarks

Enter system view

system-view

Load the patch file from the storage
media (the CF card) to the memory

patch area

patch load

Required

Activating patches

After you activate a patch, the patch takes effect and is in the test-run stage. After the device is reset or
rebooted, the patch becomes invalid.

Advertising