H3C Technologies H3C SecBlade NetStream Cards - Manual (Page 274)

259
Figure 82 Information center diagram (default) (log file is supported)
NOTE:
By default, the information center is enabled. An enabled information center affects the system
performance in some degree due to information classification and output. Such impact becomes more
obvious in the event that there is enormous information waiting for processing.
Classification of system information
The system information of the information center falls into three types:
• Log information
• Trap information
• Debugging information
Eight levels of system information
The information is classified into eight levels by severity. The severity levels in the descending order are
emergency, alert, critical, error, warning, notice, informational and debug. When the system information
is output by level, the information with severity level higher than or equal to the specified level is output.
For example, in the output rule, if you configure to output information with severity level being
informational, the information with severity level being emergency through informational will be output.
1
2
3
4
5
6
7
8
9
console
0
channel6
monitor
loghost
trapbuffer
logbuffer
snmpagent
channel7
channel8
channel9
Console
Monitor
Log host
Trap buffer
Log buffer
SNMP module
Log file
System
information
Information
channel
Output
destination
Web interface
Debugging
information
Trap
information
Log
information