6 systemized configurations, 1 basic configuration, 2 network configuration – Grass Valley DMC 1000 v.12.4 User Manual
Page 100: Systemized configurations 7.6.1, Basic configuration, Network configuration
100
DMC 1000 Digital Media Camcorder User’s Guide (v4.0)
Chapter 7 - Recording setup
7.6 Systemized configurations
Depending on your production workflow, the DMC 1000 can be used in different camera
configurations.
7.6.1 Basic configuration
A basic configuration is a single camcorder mounted on a tripod or hand held. The live video
output is directly fed into a video switcher/mixer using a single coaxial SDI connection. Camera
control is done on each individual DMC 1000 using the camcorder’s operation panels or the
remote control application LCP 400.
7.6.2 Network configuration
This configuration can be set up as a single camera operation or as a complete, multi-camera
environment. Like the basic configuration, it also has the camcorder on a tripod with live video
output via SDI but also with an OCP 400 control panel providing direct camera control and tally
control.
DMC 1000
switcher/mixer
HD-SDI
PGM out
DMC 1000
switcher/mixer
OCP 400 control panels
tally
C2IP infrastructure
HD-SDI video signal
PGM out