Grass Valley DMC 1000 v.12.4 - Manual (Page 137)

DMC 1000 Digital Media Camcorder User’s Guide (v4.0) 137
Chapter 12 - Side panel menu
input type DVITC, ATC SD, ATC HD Selects timecode type to be used for the
input: 3 Prod
f-run sync Real time, Local value,
External Selects type of timecode synchronisation. 3 Prod
ATC SD lines None, 11, 11+13, 12,
12+14, 13, 13+15, 14,
14+16, 15, 15+17, 16,
16+18, 17, 17+19, 18,
18+20, 19, 20 Selects video lines used to embed the ATC
(Ancillary Time Code) into the SD video signal. S1 Prod
dropframe mode NDF, DF Selects non drop frame (NDF) mode or drop
from (DF) for timecode. 3 Prod
DVITC line None, 14, 16, 14+16 Selects video lines used to embed the DVITC
(Digital Vertical Interval Time Code) into the
video signal. S1 Prod
ATC HD lines NONE, 9, 9+11 Selects video lines used to embed the ATC
(Ancillary Time Code) into the HD video signal. S1 Prod
play mode Regen., From file Sets the playback mode of the timecode
generator. 3 Prod
new timecode
hrs 0..23 (0) Sets value for hours. 1 Prod
min 0..59 (0) Sets value for minutes. 1 Prod
sec 0..59 (0) Sets value for seconds. 1 Prod
frms 0..29 (0) Sets value for frames. 1 Prod
recbuff
preferred media Not Active, REV-CF-EXT,
REV-EXT-CF, CF-REV-
EXT, CF-EXT-REV, EXT-
REV-CF, EXT-CF-REV Order of preferred media when the camcorder
switches media during recording. 0 Prod
metadata
storyfile no story, <list of available
storyfiles> Selects story file name used in the system. 1 Prod
Menu item Values Description Level File