7 remote recording, Remote recording – Grass Valley DMC 1000 v.12.4 User Manual
Page 102
Advertising
102
DMC 1000 Digital Media Camcorder User’s Guide (v4.0)
Chapter 7 - Recording setup
7.6.7 Remote recording
By turning remote recording on, an operator can start a camcorder recording from the
OCP 400. Go to the SYSTEM
>
HARDWARE
>
NETWORK
menu and turn the REMOTE
REC
item
on.
Start a recording by pressing the momentary CALL button at the top-right of the OCP 400. The
Tally indication on the control panel lights. When a recording is in progress, pressing the CALL
button stops the recording. The tally lights extinguish.
Advertising
This manual is related to the following products: