Grass Valley DMC 1000 v.12.4 - Manual (Page 116)

116 DMC 1000 Digital Media Camcorder User’s Guide (v4.0)
Chapter 11 - Specifications
Gain -6 to +42 dB (user-definable presets) and variable master gain between -
6 and +42 dB in 0.1 dB steps.
Audio Range from 20 Hz to 20 kHz (unweighted), 24 bits PCM, 48 kHz, dynamic
range 85 dB
Compression SD HD
DV25 PAL (4:2:0) and NTSC (4:1:1) -
JPEG 2000 10-bit, 4:2:2 10-bit, 4:2:2
30 Mb/s, 40 Mb/s and 50 Mb/s 50 Mb/s, 75 Mb/s and 100 Mb/s
MPEG-2 (requires optional
DMC 1120 board) 8-bit, 4:2:0 8-bit, 4:2:0
30 Mb/s, 40 Mb/s and 50 Mb/s
I-frame (VBR profile)
60 Mb/s and 80 Mb/s
(I-frame)
File formats and media
High quality content MXF OP-1A (SMPTE 378M), including 4 channels of PCM audio and
metadata
Metadata Compatible with SMPTE Metadata Dictionary RP210
REV drive REV PRO 35 digital media drive (DMC 1000/10) or REV PRO XP/ER
digital media drive (DMC 1000/20)
CompactFlash 2x type I and II CompactFlash slots, speed depending on media
Camcorder connectors
Front microphone input 1x XLR-3 female, balanced, +48 V phantom or1x XLR-5 female,
balanced, +48 V phantom (requires DMC 1180 option)
Rear audio inputs 2x XLR-3 female, mic/line-level, balanced, switchable +48 V phantom
Additional audio inputs 2-channel AES/EBU audio (via BNC), 1 or 2 channels (via wireless
receiver slot) and 8 channels SDI (from SDI input)
Audio outputs 1x XLR-5 male, line-level, 2-channel mixed balanced, 6.3 mm stereo jack
headphones
Additional audio outputs 2-channel AES/EBU or embedded (HD-)SDI 8 channel audio via BNC
connector.
Lens connector 12-pin female Hirose interface connector
Viewfinder connector HDMI type A connector
(HD-)SDI input BNC connector SMPTE 292M (1.5 Gb/s) or SMPTE 259M (270 Mb/s),
0.8 Vpp, 75
Ω
(HD-)SDI output BNC connector SMPTE 292M (1.5 Gb/s) or SMPTE 259M (270 Mb/s),
0.8 Vpp, 75
Ω
Analog video input BNC connector CVBS, Blackburst, Linear Timecode or AES/EBU audio,
1.0 Vpp, 75
Ω
Analog video output BNC connector CVBS, Linear Timecode or AES/EBU audio, 1.0 Vpp, 75
Ω
Power input (DC in) XLR-4 male (11.0 to 17.0 VDC)
Accessory output 4-pin female Hirose power output 12 VDC (nom.)1.0A with tally signal.
IT-connectivity
Ethernet 1 x RJ-45 Ethernet connector and 1x RJ-45 connector for future use
USB 2 x USB A host connector, 1 x USB B device connector USB 2.0
compliant
IEEE 1394 6-pin IEEE 1394 connector (powers up to 10 W)
Item Value